Wright's Aerials

Rogues Gallery

The wall bracket is quite obviously inadequate for the mast and aerial. The mast is steel and is therefore heavy. The bracket is a 6” fascia bracket with longer than normal arms, meant to provide a bit of extra offset from the wall. Unfortunately the manufacturers have used thin steel strip rather than angle for the arms, so of course they have bent. In my opinion these brackets aren’t really any good for anything. They are far too flexible and should never be used.

The masonry fixing in the bottom left corner is absent. The cables running to the amplifier are not secured, so they will eventually fracture where they enter the amp.

Previous   Next
Print this page © 2003-2012, Wrights Aerials Add to Favorites